How much timing?

[BobBonahoom]

I need some advice as I know next to nothing about FE boats. I built a JAE 21 FE hydro. I have a Leopard 3674, 2200 KV motor that I will run on 4S. From what I can tell, I should set the timing between 0-10 degrees advance. Does anyone have any specific recommendations? I have Zipp's "modified 1450" prop. The ESC is a Hobbywing Seaking 180 amp.

 

[PropNut]

The 2200kv 3674 is a D (delta) wind motor. Timing should be set at zero degrees. Also, that is a big prop to start with. It may be where you end up, but is risky on a brand new boat until you have it dialed in.

 

[BobBonahoom]

Thanks, very helpful. I will use a smaller prop to start.