brooks93
Well-Known Member
- Joined
- May 14, 2003
- Messages
- 925
selling a new Hitec HFP-10 digital servo programmer
155.00 new selling for 100.00 plus 5 for shipping
This is Hitec Servo Testor/Digital Programmer.
Works for all brands of servos with a Universal or Futaba J style connector.
FEATURES: Aluminum case, with a LCD display. Adjustment knob, ON/OFF switch
Uses an internal 1100mAh, 4.8V NiCd battery. Charge unit is located
at the end of the unit. Designed for use with any overnight charger
INCLUDES: Hitec Servo Tester.
One Hitec servo extension
Instructions
PROGRAMMING FEATURES: For Digital Servos:
Factory Default Resets Fail Safe ON-OFF
Dead Band Width Adjustments End Point
Directional Rotation Neutral Point
Speed of Rotation Fail Safe Point Preset
Features for Standard Servos:
Checks any brand of servo with a Manual test and Auto scan.
Plus it will check the Pulse width and Voltage.
Checks the transmitter signal pulse as well.
REQUIRES: Digital or Standard servos.
SPECS: Length: 5-1/2 (138mm)
Width: 3" (76mm)
Height: 1" (25mm)
COMMENTS: Additional notice, on early production Hitec digital servos, it will
lock to one side and appear to die when the reset function is used.
If this does happen, unplug the servo from the programmer and
manually twist the servo horn to the approximate "center point
of travel". This will reset the servo and is ready to program.
155.00 new selling for 100.00 plus 5 for shipping
This is Hitec Servo Testor/Digital Programmer.
Works for all brands of servos with a Universal or Futaba J style connector.
FEATURES: Aluminum case, with a LCD display. Adjustment knob, ON/OFF switch
Uses an internal 1100mAh, 4.8V NiCd battery. Charge unit is located
at the end of the unit. Designed for use with any overnight charger
INCLUDES: Hitec Servo Tester.
One Hitec servo extension
Instructions
PROGRAMMING FEATURES: For Digital Servos:
Factory Default Resets Fail Safe ON-OFF
Dead Band Width Adjustments End Point
Directional Rotation Neutral Point
Speed of Rotation Fail Safe Point Preset
Features for Standard Servos:
Checks any brand of servo with a Manual test and Auto scan.
Plus it will check the Pulse width and Voltage.
Checks the transmitter signal pulse as well.
REQUIRES: Digital or Standard servos.
SPECS: Length: 5-1/2 (138mm)
Width: 3" (76mm)
Height: 1" (25mm)
COMMENTS: Additional notice, on early production Hitec digital servos, it will
lock to one side and appear to die when the reset function is used.
If this does happen, unplug the servo from the programmer and
manually twist the servo horn to the approximate "center point
of travel". This will reset the servo and is ready to program.
