guage decals??

[Don Ferrette]

Looking for either peel & stick or water slide guage decals to do an open cockpit 1/8th scale dash, typically 1/4" or 3/8" diameter. I'm hoping there is something out there.......... h34r:

 

[RaceCraftBearings]

Looking for either peel & stick or water slide guage decals to do an open cockpit 1/8th scale dash, typically 1/4" or 3/8" diameter. I'm hoping there is something out there.......... h34r:

Don, I may be able to do this for you! I have a laser printer and have a supply of decal sheets for laser printers. All I would need to do is draw the speedo, tach, oil pressure guages and what ever elase you need.

Call me!

Ron

 

[Wesleys Custom RC]

Looking for either peel & stick or water slide guage decals to do an open cockpit 1/8th scale dash, typically 1/4" or 3/8" diameter. I'm hoping there is something out there.......... h34r:

If Ron cant help then I'v got some I made for a 68 Karlson hull. Let me know.

 

[Don Ferrette]

Looking for either peel & stick or water slide guage decals to do an open cockpit 1/8th scale dash, typically 1/4" or 3/8" diameter. I'm hoping there is something out there.......... h34r:

If Ron cant help then I'v got some I made for a 68 Karlson hull. Let me know.

Waterslides? It's for an '83 U-40. B)

 

[RaceCraftBearings]

Sorry Don they didnt work out quite right due to the smallness of them.

Give Wes a call.

Ron

 

[missbudpilot55]

I think this is what you are looking for, they aren't water slide or self adhesive but they are what I have used for several years: http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXADM3&P=0

 

[bigjohn]

Don here's the J'Tec guages in my Pay & Pac.

johm

https://www.intlwaters.com/gallery/displayimage...10254&pos=-6864

 

[Don Ferrette]

I've got a set of the J'Tec but was looking for either a water slide or peel & stick. h34r:

 

[keith warham]

Don here's the J'Tec guages in my Pay & Pac.

johm

https://www.intlwaters.com/gallery/displayimage...10254&pos=-6864

Bigjohn, where do you get that nice steering wheel?

keith

 

[Don Ferrette]

Don here's the J'Tec guages in my Pay & Pac.

johm

https://www.intlwaters.com/gallery/displayimage...10254&pos=-6864

Bigjohn, where do you get that nice steering wheel?

keith

ALLRIGHT THERE KEITH, WHO'S THREAD IS THIS ANYWAY?!?!?!?

:lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:

Sorry I couldn't resist, just kidding! LOL!!!

 

[bigjohn]

Keith, I made the weel myself. I rolled 1/16" aluminum tube in a circle, cut the center out of thin aluminum sheet, and epoxy together, wrapped the outside with thin strips of black electrical tape.

john

ps Don gust thinks this is his thread LOL

 

[keith warham]

Don here's the J'Tec guages in my Pay & Pac.

johm

https://www.intlwaters.com/gallery/displayimage...10254&pos=-6864

Bigjohn, where do you get that nice steering wheel?

keith

ALLRIGHT THERE KEITH, WHO'S THREAD IS THIS ANYWAY?!?!?!?

:lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:

Sorry I couldn't resist, just kidding! LOL!!!

Don you must agree it's a nice wheel. I need something like that for my boat.

keith