Good deal on West Systems

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
A gallon! You building a "real" boat?
default_ohmy.png
 
Goes fast when you start building molds but I would rather pay extra and skip the lung melting stench of fiberglass resin and catalyst.

That I can relate to but 'dem are some 'spensive molds!
default_blink.png
 
Last edited by a moderator:
Guys go to Fiberglass Florida web sight. Epoxy Tec 1 1/2 gal kit is $24 It is 2 to 1 mix easy to get the mix right at 2 to 1..... fast, medium or slow activator.

This is WAY better than West Systems stuff and much cheaper.

West Systems has bin over priced for a long time as it is what joe blow gets at the store and it ain't all that.........................

Have used just a little on this build. 5 gal pails at a time........LOL

O and it don't smell at all...........................................

DSCN2352.JPG
 
Last edited by a moderator:
I have used West Systems for years. Not only does it perform well, but the shelf life is great. Mike and I have tried other products and they have performed well but the shelf life was horrible. So any cost savings up front was lost on the shelf. JB
 
My bad looked to quick..............LOL still 1 1/2 gal for $77 is a great deal.

A qt. kit is 48oz will take a long time to use that all up on toy boats.

As far a shelf life? Have a bunch left over and its bin in the garage now coming on 3 years. Has not change one bit.
 
Back
Top