Gas Whiplash build

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

RaceMechaniX

Well-Known Member
Supporting Member
Joined
Apr 27, 2007
Messages
3,479
Hey Guys,

Here are some pics of my nearly complete Gas Whiplash from Blazer Marine. A local boating friend Mike Brown did all the assembly and finishinig of the boat. All I had to do was install the hadware and rig the boat. Power will be by a QD25 High Rev or Suicidal 260 for GX and G classes respectively for NAMBA racing. Fully rigged the boat only wieghs about 11 lbs. Some nice touches Mike added to the hydro were the recessed carb cut-out to allow WYK to be mounted sideways and run a direct linkage instead of the cable system. The radio box and aft compartments also have an extra wide lip to allow the covers to sit nicely. The cooling line is also hidden underneath the right side deck to keep the cooling lines tidy. The front motor mounts use double upped stringers and skinny isolators to keep the blind nuts hidden. Mike epoxy sealed the entire boat and finished her off with PPG clear. Words don't do her justice, so I took a lot of pictures. Watch out, she will be quick.

med_gallery_4990_383_410704.jpg
med_gallery_4990_383_658145.jpg


med_gallery_4990_383_420721.jpg
med_gallery_4990_383_385157.jpg


med_gallery_4990_383_31216.jpg
med_gallery_4990_383_283617.jpg


med_gallery_4990_383_849153.jpg
med_gallery_4990_383_194808.jpg


med_gallery_4990_383_56867.jpg
med_gallery_4990_383_306944.jpg


Higher res pics are available ini my gallery: http://www.intlwaters.com/index.php?autoco...si&img=2342
 
looks really nice , keep it up , this may inspire me to build a gas whip, good luck this season.

terry
 

Latest posts

Back
Top