gas rigger help

[NOFUELIN]

I ran my rigger sunday it is wanting to pull the rt sponson up hard and when it does

the boat flips. the boat is made by frank bonnano has full mod zenoh prop is 1667

the boat did this with every prop i had.

thanks mike hart

 

[Don Ferrette]

I ran my rigger sunday it is wanting to pull the rt sponson up hard and when it does the boat flips. the boat is made by frank bonnano has full mod zenoh prop is 1667

the boat did this with every prop i had.

thanks mike hart

Mike have you hit any buoys since I last saw you run it? I don't remember it having any ills like this. Make sure your sponson tubes are not bent, the sponsons are still set right & the turn fin is set correctly to start with. B)

 

[TonyKilbarger]

I ran my rigger sunday it is wanting to pull the rt sponson up hard and when it does the boat flips. the boat is made by frank bonnano has full mod zenoh prop is 1667

the boat did this with every prop i had.

thanks mike hart

Does it do this when turning right or trying to turn left. Many riggers will raise the right sponson and flip if you steer left much at all.

 

[NOFUELIN]

I ran my rigger sunday it is wanting to pull the rt sponson up hard and when it does the boat flips. the boat is made by frank bonnano has full mod zenoh prop is 1667

the boat did this with every prop i had.

thanks mike hart

Mike have you hit any buoys since I last saw you run it? I don't remember it having any ills like this. Make sure your sponson tubes are not bent, the sponsons are still set right & the turn fin is set correctly to start with. B)

Don

no i didn't hit anything iam going to check and re check all the settings tonite its very strange

but no it does not do it when you turn left any more than just turning

thanks mike

 

[Walt Barney]

I ran my rigger sunday it is wanting to pull the rt sponson up hard and when it does the boat flips. the boat is made by frank bonnano has full mod zenoh prop is 1667

the boat did this with every prop i had.

thanks mike hart

Mike have you hit any buoys since I last saw you run it? I don't remember it having any ills like this. Make sure your sponson tubes are not bent, the sponsons are still set right & the turn fin is set correctly to start with. B)

Don

no i didn't hit anything iam going to check and re check all the settings tonite its very strange

but no it does not do it when you turn left any more than just turning

thanks mike

Mike,

I had the same problem with a 40 Hydro and it was the turn fin not set properly, when running if I came to a turn the boat would make it thru abiut 1/2way then turn then fly if I slowed down ant the fin bit in it was OK but who wants to slow down to turn???

Walt Barney

 

[NOFUELIN]

I ran my rigger sunday it is wanting to pull the rt sponson up hard and when it does the boat flips. the boat is made by frank bonnano has full mod zenoh prop is 1667

the boat did this with every prop i had.

thanks mike hart

Mike have you hit any buoys since I last saw you run it? I don't remember it having any ills like this. Make sure your sponson tubes are not bent, the sponsons are still set right & the turn fin is set correctly to start with. B)

Don

no i didn't hit anything iam going to check and re check all the settings tonite its very strange

but no it does not do it when you turn left any more than just turning

thanks mike

Mike,

I had the same problem with a 40 Hydro and it was the turn fin not set properly, when running if I came to a turn the boat would make it thru abiut 1/2way then turn then fly if I slowed down ant the fin bit in it was OK but who wants to slow down to turn???

Walt Barney

Thats exactly whats it is doing

 

[Aaron Lavigne]

edit