- Joined
- Mar 28, 2007
- Messages
- 481
Super clean, good running Aeromarine Titan 40 Mono with an OS .46 VX-M engine. The boat is set-up with a 3rd channel remote needle. Both the hull and the engine are in excellent condition. The hardware is all Aeromarine. The servos are all Hitec - 645MG for steering, HS-322 for throttle and 82MG for the 3rd channel fuel mixture control. Also included is a 6-volt receiver battery, VoltWatch battery monitor, starting belt, prop blast water pick-up, Hayes antenna, 2 flex cables (one brand new) and 2 b/s/p props - Octura x450/3 & x646/3. The boat comes with 2 cowls - 1 white / 1 blue. Also I will include 2 tuned pipes - an Irwin .67 / a CMDI AB45XTS as you see in the pics.
This Titan 40 was completely built by Aeromarine Laminates including the installation of the running hardware, engine, servos and linkages, fuel tank and remote needle.
PLUS...I will include a second complete OS .46 VX-M with flywheel, header and collet with the boat. This engine has light use on it, and could be used as either the primary or for back-up.
Asking $400 plus shipping. Need to sell this boat. Lets talk. [email protected] or 661-944-3434.
This Titan 40 was completely built by Aeromarine Laminates including the installation of the running hardware, engine, servos and linkages, fuel tank and remote needle.
PLUS...I will include a second complete OS .46 VX-M with flywheel, header and collet with the boat. This engine has light use on it, and could be used as either the primary or for back-up.
Asking $400 plus shipping. Need to sell this boat. Lets talk. [email protected] or 661-944-3434.
Last edited by a moderator: