Fire Fighter Gas outrigger

[Shane Bastick]

Does anyone have information on standard set up, for the fire fighter gas outrigger, i.e. engine placement, prop choices etc

any information would be greatly appreciated

thanks

Shane

 

[MikeP]

Hi Shane

I have one I am running with a mod 29.5cc mounted as far forward as you can get it. My best prop so far is a 2816/2 with bar cuts. 2814/2 is good too. I am at high alt. so you may be able to pull bigger props. 2716/2 is a good prop to have and start with and get things going. Works good on a mod 26cc.

Mine is the 4" tub from the first drawings and I think it is awsome well behaved rigger.

http://www.deckerdunkers.com/forums/index.php?/topic/1161-ddra-rocky-mountian-shootout-2012/

-MikeP

 

[Shane Bastick]

Hi Mike,

many thanks, this is my first gas rigger, have only built nitro riggers until now, I'm going to use a Omen race modified 29cc with stroker crank.

The FFgas rigger seems like a very neat design - no frills, but well thought out.

Shane

 

[Roxyflash]

Heres a few http://i176.photobucket.com/albums/w165/Roxyflash/IMG_3026.jpg

http://i176.photobucket.com/albums/w165/Roxyflash/IMG_3027.jpg

http://i176.photobucket.com/albums/w165/Roxyflash/FireFighter%20Rigger/IMG_3326.jpg

http://i176.photobucket.com/albums/w165/Roxyflash/FireFighter%20Rigger/IMG_3298.jpg

http://i176.photobucket.com/albums/w165/Roxyflash/FireFighter%20Rigger/IMG_3285.jpg

 

[Roxyflash]

The blue one we ran a 2717/2 it has a gizmo 26 with cooper pipe.The tube is 5 inch wide 4 1/2 inside we used a 1/2 x 1 inch vibration mounts.This way you can use a standard mount accutech turn fin tsunami cowl.Use 5/8 tubing on the tub 1/2 in the sponsons.

 

[Shane Bastick]

Great , the riggers look fantasic

thanks for the pics

 

[giuseppe gallegra]

Hello Shane,

i have build one Firefighter Gas rigger, and i have much photos, also before of painting.

Please,let me know you direct email and i send the photos.

Regards

Giuseppe - Italy

email: [email protected]

 

[TOM DRIVER]

Giuseppe

I too have a gas rigger

What I need are the assembly instructions( especially the sponsons).

Can't make sense of what I have.

My email is [email protected].

Thanks Tom

 

[Roxyflash]

Sent you a PM