- Joined
- Mar 28, 2007
- Messages
- 481
Well as much as I hate it, it's time to start thinning down some of the boat collection. I recently down-sized my living quarters to prepare for retirement and have lost my garage in the process.
I have a used but clean TS-2 hull with an almost new K&B 3.5SS mounted. The engine truly hasn't seen more than a 1/2 gallon of fuel. All bearings are excellent and the p/s have very good compression. Throttle servo is a JR250 with Sullivan #508 cable to "gold" carb. Steering servo is a Hitec 645MG with 4:40 rod to steering arm. A volt meter is mounted to radio box cover to display rx battery voltage. The engine is mounted to the transom on a new screw adjustable "Hijacker" mount. A P-215 b/s/p prop is mounted. Stumble pads are epoxied to the bottom of the hull. A K&B stock SS muffler is on the engine. The lower unit has been polished.
Stock Aquacraft stand is included. If you're using Airtronics radio gear, I will leave the 92836 rx in the boat. No tx is included with the boat. I will also make the buyer of the boat a heck of a deal on a brand new piston/sleeve, prop shaft, and flex cable and a used Silver Bullit tuned pipe, if those items are wanted.
I'm asking $250 plus shipping.
I have a used but clean TS-2 hull with an almost new K&B 3.5SS mounted. The engine truly hasn't seen more than a 1/2 gallon of fuel. All bearings are excellent and the p/s have very good compression. Throttle servo is a JR250 with Sullivan #508 cable to "gold" carb. Steering servo is a Hitec 645MG with 4:40 rod to steering arm. A volt meter is mounted to radio box cover to display rx battery voltage. The engine is mounted to the transom on a new screw adjustable "Hijacker" mount. A P-215 b/s/p prop is mounted. Stumble pads are epoxied to the bottom of the hull. A K&B stock SS muffler is on the engine. The lower unit has been polished.
Stock Aquacraft stand is included. If you're using Airtronics radio gear, I will leave the 92836 rx in the boat. No tx is included with the boat. I will also make the buyer of the boat a heck of a deal on a brand new piston/sleeve, prop shaft, and flex cable and a used Silver Bullit tuned pipe, if those items are wanted.
I'm asking $250 plus shipping.
Last edited by a moderator:
