F/S....45 Eagle SG

[Elias Vazquez]

A friend has asked me to help him sell his beautifully finished 45 Eagle SG., Boat is clean, solid, and runs perfect!..."ALL IN NEAR NEW CONDITION"...Is fitted with a CMB 45VAC that has less than a gallon of fuel through it, Zoom Carb, CMB straight Nitro Pipe & Header, Wood's Oiler, CMDi third channel needle, a $140..425 oz.in. Futaba S9157 digital coreless metal gear steering servo, new drive shaft, carbon fiber cowl & deck lids, comes with an older metal fuel tank. I recommend to upgrade it to a Walt B. Stainless hump tank w-large tubing.

Would prefer to sell as is...ready to run, minus receiver and battery. But if there are no takers, will consider splitting.

Price complete ARTR...$1,300. buyer pays for shipping...SOLD!

If splitted prices will be as follows...

**Complete Boat w-running hardware, third channel needle, oiler, metal tank, minus radio gear.."no servos"..."no drive shaft"...$350.00

**CMB 45VAC w-original carb...$425.00

**Zoom Carb..."Spoken For"

**Pipe & Header..."Spoken For"


**Futaba Servos..."Spoken For"

"BUYER PAYS SHIPPING"

 

[Al Hobbs]

I'll take the boat and hardware for $350.00 plus shipping if you decide to split it up.

Let me know and I'll send payment.

Al Hobbs

 

[Elias Vazquez]

I'll take the boat and hardware for $350.00 plus shipping if you decide to split it up.

Let me know and I'll send payment.

Al Hobbs

Thanks Al!..we'll give it a couple days see what happens.

Elias

 

[benjamin Nguyen]

Hi

If Al passes, I' ll take the boat and hardware for $350.00 plus shipping.

thanks

 

[David Bryant]

beautiful SGX2-45! I'm building exact same set-up.

Just curious, who manufacturers the canopy latches?

 

[Elias Vazquez]

Hi

If Al passes, I' ll take the boat and hardware for $350.00 plus shipping.

thanks

Sure Benjamin, have you as second on the list for the boat.

Thanks...Elias

 

[Al Hobbs]

I'm not going to pass.....

Al Hobbs

 

[Elias Vazquez]

beautiful SGX2-45! I'm building exact same set-up.

Just curious, who manufacturers the canopy latches?

David they are AquaCraft GrimRacer Locks, you could order them through Tower Hobbies.

Here's the link...http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXMHB4&P=7

 

[David Bryant]

beautiful SGX2-45! I'm building exact same set-up.

Just curious, who manufacturers the canopy latches?

David they are AquaCraft GrimRacer Locks, you could order them through Tower Hobbies.

Here's the link...http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXMHB4&P=7

thanks Elias!

 

[Elias Vazquez]

beautiful SGX2-45! I'm building exact same set-up.

Just curious, who manufacturers the canopy latches?

David they are AquaCraft GrimRacer Locks, you could order them through Tower Hobbies.

Here's the link...http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXMHB4&P=7

thanks Elias!

Your welcome!..good luck with your build, they are great boats.

Elias

 

[David Bryant]

beautiful SGX2-45! I'm building exact same set-up.

Just curious, who manufacturers the canopy latches?

David they are AquaCraft GrimRacer Locks, you could order them through Tower Hobbies.

Here's the link...http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXMHB4&P=7

thanks Elias!

Your welcome!..good luck with your build, they are great boats.

Elias, can you also provide thickness of carbon fibre sheet/plate used for radio compartment lid? (.059in ?)

Thanks again

 

[Elias Vazquez]

beautiful SGX2-45! I'm building exact same set-up.

Just curious, who manufacturers the canopy latches?

David they are AquaCraft GrimRacer Locks, you could order them through Tower Hobbies.

Here's the link...http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXMHB4&P=7

thanks Elias!

Your welcome!..good luck with your build, they are great boats.

Elias, can you also provide thickness of carbon fibre sheet/plate used for radio compartment lid? (.059in ?)

Thanks again

David, carbon plate is .063

 

[Elias Vazquez]

Sale pending.

 

[Elias Vazquez]

Sold!..thanks!