Engine Mount Washers

[Daniel's Racing]

I have two sets of these .187" (3/16")thick machined 6061 washers for the engine mount bolts mainly used on riggers but can be used on any hull or any other application where you want a nice machined large O.D. 1/4" washer. These fit 1/4" exactly not sloppy loose like most 1/4" washers are. The O.D. is 1.187".

These help save the tub in a wipeout as they stay flat and have more surface area flat on the surface to grip the wood and support the engine mount.

One set of 4 machined aluminum and 4 nylon washers.

$24 a set of 4 plus $4 shipping. Paypal is [email protected]

One set is sold. One left.

Thank you.

 

[Steve Seebold]

How thick are the washers?

 

[Daniel's Racing]

How thick are the washers?

First thing mentioned in the post was the thickness.

The aluminum is .187" thick.

The nylon washer is pretty thin and you don't have to use them. Best to use at least some silicone on the backside though if you choose to skip the nylon washers just so they won't shimmy around on the wood and make that nasty goo aluminum makes when it rubs on things.

 

[Steve Seebold]

I should have been specific, I was referring to the nylon washers.

 

[Daniel's Racing]

I should have been specific, I was referring to the nylon washers.

Steve,

The nylon washers are .064" thick.