Engine & Hardware for sale

[missbudpilot55]

Competion Marine Designs: Anti-walk strut (NIP) $25, **SOLD**

"67" SG-II Turn Fin (NIP) $25

"67" SG-II ABS Cowl (new) $15 ***Sold**

Thunderboat Reproductions: H20 Thru-hull strut for 3/16" shaft $20 each (2 avail 1 new 1 used) **New Unpolished is Sold** 1 only left

H20 extended Ruddder Assembly, used (polished) $50

Tidewater Marine: Large Rudder Assembly,new, $30 **SOLD**

1/4" flex-cable 25" long w/3/16 turn-down stub $15 **SOLD**

1/4" flex-cable shaft 30" long full 1/4" shaft $15 ***SOLD**

CMB CAM 67, Gold twin plug head, motor blue printed by John LeLonde, rear drum modified by Andy Brown for Tidewater. Over $700 invested in this engine, barely broken in approx. 8-10 tanks of 50% fuel through it, idles really good and transition to full power is excellent. Motor was built for a scale boat, is a real powerhouse. $250

K&B 3.5 Inboard Motor #8916 with gold carb, 12 degree & 20 degree headers, regular 21 and "quiet 21 pipes included, little run motor. $125

K&B Red Carb : $10 ***SOLD**

10 each MC-9 plugs (package deal) $25 **SOLD**

Tools: Head Clearance Dial Indicator $35 ***SOLD**

3/16" Prop Bore Reamer $20

1/4" Prop Bore Reamer $25

Pack of 24 1/4" aircraft lock type prop shaft nuts $15 **SOLD**

Pack of 14 3/16" aircrft lock type prop shaft nuts $7 **SOLD**

Equipment: Hand Crank Fuel Pump (NIP) $10 2 availalbe for glow fuel only

Hobbico Micro Power Pro Panel with Glow Starter Charger (NIP) $ 20

Misc.== "Dukes of Hazard" "BO" doll approx 1/8th scale $20 each (2 avail.)

J&G Racing Prod. waist up 1/8th scale driver figure kit (NIP) $25 **Sold*

for more info or pics of item send email to: [email protected]

Bill Diedrich B)

Ventress, La.

 

[Glenn1087]

I'll take the CMD strut and K&B red carb.

Thanks, Glenn B

 

[Don Ferrette]

" Pack of 24 1/4" aircraft lock type prop shaft nuts $15

Pack of 14 3/16" aircrft lock type prop shaft nuts $7"

If these are the reduced head (3/16" propnut uses 1/4" wrench & 1/4" propnut uses 5/16" wrench) style I'll take all the prop nuts.

 

[Dave Rumble]

I would like to buy the following parts.

Tidewater Marine: Large Rudder Assembly,new, $30

1/4" flex-cable 25" long w/3/16 turn-down stub $15

10 each MC-9 plugs (package deal) $25

[email protected]

 

[missbudpilot55]

" Pack of 24 1/4" aircraft lock type prop shaft nuts $15Pack of 14 3/16" aircrft lock type prop shaft nuts $7"

If these are the reduced head (3/16" propnut uses 1/4" wrench & 1/4" propnut uses 5/16" wrench) style I'll take all the prop nuts.

Yes Don , they are all that type of prop nuts,

Send Pay Pal to [email protected] please add $2 for shipping,

Thanks again,

Bill Diedrich

 

[missbudpilot55]

I would like to buy the following parts.
Tidewater Marine: Large Rudder Assembly,new, $30

1/4" flex-cable 25" long w/3/16 turn-down stub $15

10 each MC-9 plugs (package deal) $25

[email protected]

WHIPLASH22,

Please send Pay Pal to [email protected],, please add $5 for shipping

Thanks,

Bill Diedrich

 

[Don Ferrette]

Bill you have $$ B)

 

[missbudpilot55]

AT THE SPEED OF SOUND -----------------------------------------

THANKS AGAIN DON,

 

[Dave Rumble]

Payment sent via paypal.

thanks again

 

[[email protected]]

Bill,

I'll take the J&G driver if it's the full size with the life vest and cloth clothing.

Rodney

 

[Don Ferrette]

Payment sent via paypal.
thanks again

That modified CMB gold head cam motor sounds like a good deal & you might want to consider it for your Winston. Last modified gold head I had a couple seasons ago was rippin' a$$ fast. If it didn't wind up injesting a piece of debis I might have still been running it. B)

 

[[email protected]]

Bill,

How much for shipping?? $3.85 for Priority??

I'll take the driver just as long as it's not the small poured resin head.

RG

 

[[email protected]]

Bill,

I might be interested in the Thunder Boat Reproduction strut and ruddar but would like to see a picture of them first since I've never seen Casparian's parts before.....LOL I almost put his first name and then read it...man that's funny....

 

[zagustin]

Hi Bill,

you got email from Germany.

Thanx..............Werner

 

[Glenn1087]

Hey Bill,

$$ sent to your PayPal account.

Thanks, Glenn

 

[[email protected]]

Bill,

YG$$$$ Bling-Bling

 

[Hap Mulvany]

I will take the 1/4 x30 flex shaft for 15 plus 3.85 shipping tel me whwere to send the check ship to Hap Mulvany

800 Mimosa Av

Titusville Fl

32796

E-mail [email protected]

 

[Tracker]

Hi Bill. I would like to buy the Head Clearance Dial Indicator $35. Send me a email if it is still for sale.

Allan Hoyle

[email protected]