Eagle SG/SGX Turn Fin Hole Locations

[RaceMechaniX]

Guys,

Can anyone verify that SG's and SGX's in the 67/80/90/101 size share a similar bolt hold pattern for the turn fin? I have an older SG67 with a bent/soft turn fin and would like to search for a new fin but wanted to expand the search if several different hull sizes would fit.

Thx,

TG

 

[Andy Brown]

Hey Tyler,

I will have to check myself, but I think the 67/80 SG, the 67 SGX and the 80 SGX are all the same bolt pattern. I will return with answers!

 

[RaceMechaniX]

Thx Andy,

Tyler

 

[RaceMechaniX]

Andy,

Did you have a chance to measure any of the turn fins?

TG

 

[Andy Brown]

Tyler,

The 67 and 80 SG are the same hole pattern. The 90/100 SG has the 2 top holes on the same 2" centers, but the lower center hole is off about 1/8".

The 67 and 80 SGX both have the same top 2" on centers pattern, except the lower center hole is raised about .090" higher than the SG 67 and 80 location.

I forgot to check the 90/101 SGX, but it is probably about the same as the SG 90/100.

 

[RaceMechaniX]

Thanks Andy,

Do you happen to have any SG 67/80 turn fins left?

Tyler

 

[Andy Brown]

We have the patterns, so we can make them Tyler. Send an email to [email protected] to order.

Thanks and good boating!