Reply to thread

Im just gonna chime in to help out, but if hydro has a better idea by all means listen to him as he is obviously as good as or BETTER  at this stuff as i ever dared to be! I would use slow set epoxy and glue in a 1/16 to 1/8th doubler and i would make it fit bulkhead to bulkhead on top of the floor of the boat....if you want it to be real strong you can add some light wieght fiberglass cloth to the doubler and run it right up the transom....it will add a little weight but will be strong and im the first one to admit that i overbuild my stuff cause i hate to see my boats fall apart! Again if hydro has a better idea, by all means USE IT!