CMB 90/91/101 Engine Parts

[John Knight]

I have various NEW engine parts for sale:

91HR

Front drum assembly with drum, lists for $120, sell for $75

EVO

Rod, lists for $70, sell for $45

Water jacket, gold EVO1, with O ring, lists for $50, sell for $25

101RS zimmerman disc (2), 1 @ .015 and 1 @ .030 thickness, lists for $30, sell for $20

91RS/EVO flywheel (black), with collet, lists for $45, sell for $25

EVO2/91RS/101RS housing, black with flange for carb, lists for $45, sell for $25 - SOLD

First to say here I'll take is yours. Shipping is $5, MO, cashiers check or Paypal at address of [email protected]

 

[Buckshot]

EVO2/91RS/101RS housing, black with flange for carb, lists for $45, sell for $25

First to say here I'll take is yours. Shipping is $5, MO, cashiers check or Paypal at address of [email protected]

Hello John,

I'll take the back plate if it is the o-ringed version for an RS 101.

Regards,

-Buck-

 

[Tim_Duggan]

"EVO2/91RS/101RS housing, black with flange for carb, lists for $45, sell for $25"

What diameter is the hole for the carb? I believe there are two different sizes. 12mm or 13mm. If it's 13mm and Buck doesn't want it, I'll take it.

 

[John Knight]

EVO2/91RS/101RS housing, black with flange for carb, lists for $45, sell for $25

First to say here I'll take is yours. Shipping is $5, MO, cashiers check or Paypal at address of [email protected]

Hello John,

I'll take the back plate if it is the o-ringed version for an RS 101.

Regards,

-Buck-

Buck,

There is a slot for an O ring inside of a flange surrounding the carb inlet, which is 13MM ID. Has a carb bolt hole at the 12 and 6 o'clock positions.

John

 

[John Knight]

"EVO2/91RS/101RS housing, black with flange for carb, lists for $45, sell for $25"
What diameter is the hole for the carb? I believe there are two different sizes. 12mm or 13mm. If it's 13mm and Buck doesn't want it, I'll take it.

Tim,

See my reply to Buck above. It is a 13MM hole.

 

[BigChuck]

John dose the back plate in queston have a sealing o-ring around the large dia.that fits were the disk is?

Aslo are the disk stock or the thinned ones?

Chuck

 

[John Knight]

John dose the back plate in queston have a sealing o-ring around the large dia.that fits were the disk is?
Aslo are the disk stock or the thinned ones?

Chuck

Chuck,

There is a sealing o ring on the internal flange that fits into the engine front. None directly where the disc is.

The disc's are different thicknesses:

1 @ .015 or .39MM

1 @ .030 or .78MM

One of each so it appears. Glad you asked.

 

[BigChuck]

Ok, Thanks

Was looking for a set.

 

[Tim_Duggan]

Tim,
See my reply to Buck above. It is a 13MM hole.

Thanks John,

Thats exactly what I need, but If Buck want's it, he should get first shot at it. If he passes, I'll take it.

Regards,

Tim.

 

[Buckshot]

EVO2/91RS/101RS housing, black with flange for carb, lists for $45, sell for $25

First to say here I'll take is yours. Shipping is $5, MO, cashiers check or Paypal at address of [email protected]

Hello John,

I'll take the back plate if it is the o-ringed version for an RS 101.

Regards,

-Buck-

Buck,

There is a slot for an O ring inside of a flange surrounding the carb inlet, which is 13MM ID. Has a carb bolt hole at the 12 and 6 o'clock positions.

John

Paypal sent

-Buck-

 

[John Knight]

EVO2/91RS/101RS housing, black with flange for carb, lists for $45, sell for $25

First to say here I'll take is yours. Shipping is $5, MO, cashiers check or Paypal at address of [email protected]

Hello John,

I'll take the back plate if it is the o-ringed version for an RS 101.

Regards,

-Buck-

Buck,

There is a slot for an O ring inside of a flange surrounding the carb inlet, which is 13MM ID. Has a carb bolt hole at the 12 and 6 o'clock positions.

John

Paypal sent

-Buck-

Thanks and SOLD!!