• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

CLEAN UP SALE

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

NAMBA860

Well-Known Member
Supporting Member
Joined
Sep 4, 2007
Messages
3,797
1.fritz canard $600.00 (sold)

2. wood 36 inch round nose built with hard ware kit not installed yet purple k&b epoxy paint $75.00

3.37 inch aeromarine scorpion mono hull $60.00
 
Last edited by a moderator:
Shane,

I'm very interested in:

4.37 inch aeromarine scorpion mono hull $75.00

4. 32 inch aeromarine scorpion mono hull with hardware,radio box ,and engine mount $75.00

9.1982 exucutone newton plans unpainted less engine tx/rx nice fast boat $300.00

I need one mono for sure I have a feeling the 32 inch mono is what my son needs to race in the Kids are Boaters to class this summer.

And the scale would be a bonus depending on the amount of work needed.

Please send me pictures:

[email protected]
 
Shane,

I'm very interested in:

4.37 inch aeromarine scorpion mono hull $75.00

4. 32 inch aeromarine scorpion mono hull with hardware,radio box ,and engine mount $75.00

9.1982 exucutone newton plans unpainted less engine tx/rx nice fast boat $300.00

I need one mono for sure I have a feeling the 32 inch mono is what my son needs to race in the Kids are Boaters to class this summer.

And the scale would be a bonus depending on the amount of work needed.

Please send me pictures:

[email protected]
the scale needs nothing its complete install your engine, and tx/rx and go of course you will eventually want to paint it. i dont know how to put photos on intl. waters
 
Shane,

Does the cmb-80 have a standered flywheel or the short pancake style, red or green head??

If its a standered flywheel Iwill take it. PM me with your address for payment.Thanks.

Don :)
 
Shane,

Does the cmb-80 have a standered flywheel or the short pancake style, red or green head??

If its a standered flywheel Iwill take it. PM me with your address for payment.Thanks.

Don :)
the cmb .80 is the new r/s it is the cam engine long flywheel red head drum rotor also have the green head version h/r if you would like that instead.
 
Shaen what about the SEADUCER CMB 90 EVO PURPLE X MONO?

are you selling it also?
no i'm keeping the seaducer my a outboard mono cal craft, my .80 power cal craft x mono and my mto sport 60 the rest is going. sliming down to 4 boats

Shane,

Check for $325 will go in mail tomorrow for the redhead 80 cmb.

Thanks :)

Don
10-4 don i will get it boxed up thanks for the purchase
 
4. 32 inch aeromarine scorpion mono hull with hardware,radio box ,and engine mount $75.00
If this is still available I'll take it, let me know ....
its yours if you want it i will have to cancel the add on ebay give me your adress so i can figure the freight how will you be paying for it?

How much for this one? 1/8 SCALE NEWTON 82 EXECUTONE CMB .80 R/S RED 1/8 SCALE UNLITED HYDRO
 
I am a poor model boater from Australia and I would really like to get one of those Canard things.

Now I have fallen into your trap, can you PM me and let me know if the Canard is still available. Maybe we can negotiate a satisfactory exchange.

I will be in the States next week, where would I have to go to pick this up if we can sort out a deal?

I look forward to your prompt reply as I leave day after tomorrow for Scottsdale.

Wild Bill Annabel.
 
Sounds like Wild Bill might going back to Aussie land with a Fritz canard. Bill if you & Shane can hook up the Fritz boats are real nice. ;)
 
Back
Top