best prop for seaducer 21

[thomas erb]

I was wanting some input on best prop I have a SD1 hull with a Picco p5 black case any comments

 

[Rhonda Pickard]

Get with Mark Sholund on here other wise known as shoboat you will want a 1614/3 let him know your set up and the prop be fixed to your boat then hang on. Another prop that is good is a 440/3 Robert Pickard

 

[ALLAN YUEN]

use OCT X437/3 or Prather 215 for better your subsurface drive ( old style mono ) Good Luck!

 

[thomas erb]

Well right now I'm useing a Octura 440/3 and seems like it still has alot left in it I've used a prather 215 and did not work good at all

 

[thomas erb]

This is the set up right now

 

[ALLAN YUEN]

This is the set up right now

Oh I see you did change strut on surface drive better contact to Jerry Crowther he will help you

 

[shoboat]

Thomas,

Your X-440/3 is looking a little rough on that transom.

I would start with a ABC 1614/3 Chopper and add some pitch in the

center of the blade if needed. $50.00 shipped.

Thanks For Reading,

Mark Sholund

 

[SayMikey]

Id try a m440

 

[Buddy Benedict]

We had the same boat with a modded nova rossi rx motor and we used a stock M445.

 

[Thomas Hulbert]

are the tab flush with the bottom or above the transom.I hope they are as they look like they might be below in the pic angle.

Also you could remove the second water pickup mounted to the hull as this will help with the handling of the boat.

(left side of strut beside trim tab. )