ABC 62 x 80 propellers for round nose scales

[shoboat]

Scale Boaters,

I just received 2- 62 x 80 propellers from ABC yesterday.

More are available if needed?

I Measured the 62 X 80 ABC Propeller:

5.63" of trailing edge cup at .7 radi

4.50" of center of blade pitch

60.60 mm diameter this is raw in the package numbers on a

Steve Wood pitch gauge.

Thanks,

Mark Sholund

 

[FloridaScaleBoater]

Please put my name on one Mark I will talk to you after the weekend

 

[shoboat]

Rick and Dave,

I have them here set aside for you.

Jim has 8 more in stock if you need any more.

Just find out how much diameter you need taken out of these.

About 57 to 59 mm would be my guess.

Let Me Know?

Mark

 

[FloridaScaleBoater]

Rick and Dave,

I have them here set aside for you.

Jim has 8 more in stock if you need any more.

Just find out how much diameter you need taken out of these.

About 57 to 59 mm would be my guess.

Let Me Know?

Mark

Mark,

I am running the 62x80 stock diameter & pitch, Don't even know what the Dia. is stock.

Just would like a touch taken off the Dia. for a little better "punch" from milling and exiting the corners

 

[Olly]

Can I have one Mark and if so could you bring it to Spencer Park?

Thanks

Olly

 

[dave weagel]

Rick and Dave,

I have them here set aside for you.

Jim has 8 more in stock if you need any more.

Just find out how much diameter you need taken out of these.

About 57 to 59 mm would be my guess.

Let Me Know?

Mark

mark,

thank you for holding a 62X80 for me.

i don't know what the finished diameter should be.

maybe andy brown or rick b. can recommend correct dimension.

thank you,

dave w.

 

[FloridaScaleBoater]

Dave,not sure what you plan to run this on? Last you had mentioned something about gas scale props. This prop we are discussing is a 1/8 scale prop

 

[dave weagel]

Dave,not sure what you plan to run this on? Last you had mentioned something about gas scale props. This prop we are discussing is a 1/8 scale prop

email to you

 

[shoboat]

Dave,

Numbers on these propellers have been measured and I

put them in my first post above.

Thanks,

Mark Sholund