Reply to thread

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

You can become a Supporting Member which comes with a decal or just click here to donate.

Message

Mike,
I believe that propeller worked the best at
66.55 mm if you would like send it to me
and I will update it with the best numbers
from the other propeller that we kept for
more testing. We found out in testing that
these stock motors do the best with smaller diameters. You can also raise up the strut to achieve the same thing. We are testing a 2819/3 that I cut down next, hopefully today. I think another propeller the 2719/3 may work even better. I am still working on that one in my shop though.

Thanks,

Mark

[QUOTE="shoboat, post: 874356, member: 137"] Mike, I believe that propeller worked the best at 66.55 mm if you would like send it to me and I will update it with the best numbers from the other propeller that we kept for more testing. We found out in testing that these stock motors do the best with smaller diameters. You can also raise up the strut to achieve the same thing. We are testing a 2819/3 that I cut down next, hopefully today. I think another propeller the 2719/3 may work even better. I am still working on that one in my shop though. Thanks, Mark [/QUOTE]

Verification