90 Rigger

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Walt Barney

Well-Known Member
Vendor
Joined
Dec 3, 2003
Messages
3,344
OK all you people who run 90 riggers I have a friend who needs to start runing his hydro with a 90 OPS and needs prop advise in both ABC and Octura.

Thanks

Walt Barney
 
I've found a stock 1667 will make the boat hop bad, needs to be cupped up some?? ABC 67x114 is also a good prop S/B. B) B)
 
Last edited by a moderator:
Octura=

Good old 1667 w/5.8"-6.0"cup.

Like Ray said, cup will be needed to reduce lift.

ABC=

H-50

-Buck-
 
Last edited by a moderator:
OK all you people who run 90 riggers I have a friend who needs to start runing his hydro with a 90 OPS and needs prop advise in both ABC and Octura.Thanks

Walt Barney

1667 6.0 cup would be a great place to start. Just start adding tip cup to increase MPH.
 
Last edited by a moderator:
I know of several well known racers, some of them come to the spring nats, that are running pitched up H-32's on their 90 riggers. H-45, H-48 and H-50 will work but need a strong engine to pull them. H-38 and 1667 also work well.
 
I know of several well known racers, some of them come to the spring nats, that are running pitched up H-32's on their 90 riggers. H-45, H-48 and H-50 will work but need a strong engine to pull them. H-38 and 1667 also work well.
John's got a point, remember the OPS 90 was not a real RPM machine. B) B)
 
Back
Top