90 rigger prop

[Drew Hamilton]

got a 80 SG I use to run with a K90. I decided to put a 1.00 CMB in it. It seems to like an H50, but wants more. Any body got any ideas on props? Thanks Drew

 

[shoboat]

Drew,

You just need a little more cup in the H-50. Or try a 2618 or a 2716 and

hold on tight.

Good Luck,

Mark Sholund

 

[AndyBrown]

Drew, If the H-50 is stock it has about 6.0 cup on one blade and about 6.5" cup on the other.

6.6" to 6.8" cup on both blades should be good.

 

[Don Ferrette]

Another good one to try is a 1667 cupped to 6.5" with that big block CMB. B)

 

[AndyBrown]

Check out the new "Prop Wall" at CMDRACING.com

You can see what we have in stock and ready to ship.

Order by e-mail as it's first come first serve.

Shameless plug!!

Hope this new system severs everyone well.

We have stepped up production.