90 microburst props

[a lonadier]

I am building a 90 microburst (newer style) with a cmb 90 evo (gold head). Is there a 3 bladed prop that will work on this boat and engine combo.

thanks for any help

Aurbin

 

[Joe Warren]

I am building a 90 microburst (newer style) with a cmb 90 evo (gold head). Is there a 3 bladed prop that will work on this boat and engine combo.

thanks for any help

Aurbin

X462/3 octura for your 3 blade.... But a X-467 2 blade works very well on that Hull Too.

 

[Terry Flynn]

I would think that the X460/3 might be a tad small for a 90. I would run the x467 like Joe said. Im running a x462 with a 80 in a seaducer and I'm going to try the x467 this year. the 80 is RPM n with the x462.

good luck

Terry

 

[ALLAN YUEN]

Best one of OCTX665 /2 really fast Good Luck!

 

[david showers]

I am building a 90 microburst (newer style) with a cmb 90 evo (gold head). Is there a 3 bladed prop that will work on this boat and engine combo.

thanks for any help

Aurbin

hey this is david showers owner of microburst boats how long ago did you purchase this boat

 

[david showers]

the prop that works really good for the microburst new f mono are the abc 2714 20 deg.rake or 2814 20 deg.rake or mod 3014 from micrburst to make contact with those guys call(904)460-2961

 

[a lonadier]

I got it in 07 for you david

 

[Scott Schneider]

Race a newer 47.5" MB with zenoah 231 power, a .90 nitro should pull as much or little of prop ?

My MB is ballistic running the little Propshop/VooDoo 6516/3 with a tad bit of tip cupping.

Tho the stinger drive on mine is as LOW as it can go, the MB's do not do well with much prop torque rolling the hull on there side :angry: