90 Hydro Props Wanted

[Russell Bear]

Looking for the following:

ABC H-31

ABC H-45

ABC H-48

ABC H-50[/]

Octura 1667

I have the following:

Prather 235 (S& B)

Prather 245 (S& B)

Prather 250 (S& B)

Octura X450/3 (S& B)

Octura X460/3 (New)

Thanks........

 

[Don Ferrette]

http://www.intlwaters.com/index.php?s=&amp...st&p=170071

 

[shoboat]

Russell,

I will trade you a few that you need for the Prather 250,X-460/3,& X-450/3.

Which ones do you want to start off with? I would try the 1667 @ 5.63",H-48,& another 1667

with different cup then the first one. 6.00" of cup with good RPM and you will be

happy. The H-50 is good if you have a good set up and a lot of motor. What boat,

engine,pipe,fuel %,weight are we talking about?

Thanks,

Mark Sholund

 

[Russell Bear]

Russell,

I will trade you a few that you need for the Prather 250,X-460/3,& X-450/3.

Which ones do you want to start off with? I would try the 1667 @ 5.63",H-48,& another 1667

with different cup then the first one. 6.00" of cup with good RPM and you will be

happy. The H-50 is good if you have a good set up and a lot of motor. What boat,

engine,pipe,fuel %,weight are we talking about?

Thanks,

Mark Sholund

Mark, Sounds good. You can take all three for the H-48 and the 1667 @ 5.63. If this is OK, I'll get these out to you on Monday.

Thanks.......

 

[CConrad]

What boat,

engine,pipe,fuel %,weight are we talking about?

Thanks,

Mark Sholund

Ithink, this one:

Great engine!

 

[Russell Bear]

What boat,

engine,pipe,fuel %,weight are we talking about?

Thanks,

Mark Sholund

Ithink, this one:

Great engine!

Hey! That's it. Yep, CMB 91HR, New Cooper 90 HP Pipe, 45-50% Nitro, not sure on the weight yet.

 

[shoboat]

Russell,

Start with 40% fuel with a little added castor to break your engine in. Once break-in is done

you can move up with the fuel %. It is all good!

I will get your propellers ready.

Thanks,

Mark Sholund

 

[CConrad]

Hello Mark,

i'm currently building a Twin SGX90 with two HR91's. What props would you recommend for heat racing??

Regards

Curt

 

[shoboat]

Curt,

1667's seem to work VERY WELL @ 5.63" to 6.00" of cup. We have been working on some others

like H-48's & H-50's,but we always go back to the 1667's. ABC 2716's may show some promise,

but we have not modified them enough to fit most applications.

Enjoy The Holiday,

Mark Sholund

 

[Mike Byer]

Russell, when you get ready to run you can borrow one of my h-50's it might work, but I don't think so, might keep you from buying something that you can't use.

Mike B

 

[Russell Bear]

Russell, when you get ready to run you can borrow one of my h-50's it might work, but I don't think so, might keep you from buying something that you can't use.

Mike B

Sure appreciate it. I'll definitely keep you in mind.

Mike, run the Villain yet?

Thanks.....

 

[Mike Byer]

I went to winterize my boats yesterday, and I should have taken it along, the water was like glass, it would have been perfect. I'm planning to go back this comming weekend, maybe then if the weather holds. What boat is your new 90, looks like a r/r but has carbon sponsons, something you built or has Ralph gone to carbon?

mike b

 

[Russell Bear]

I went to winterize my boats yesterday, and I should have taken it along, the water was like glass, it would have been perfect. I'm planning to go back this comming weekend, maybe then if the weather holds. What boat is your new 90, looks like a r/r but has carbon sponsons, something you built or has Ralph gone to carbon?

mike b

Actually I scratch built it. It is a Roadrunner copy. I have a 20. 40 and 60 RR. Was able to find others with 90 RR's and just scaled my 60 boat up a bit.

Ralph is actually offering his hulls in two different versions now. One all wood and the other with G-10 sheeted sponsons.

 

[jeff baham]

russ i got an h-50. you can try.

 

[shoboat]

Russell,

I have an H-50 that you can have,I will send it with the others.

They shipped out a few days ago Russell. Enjoy!!!

Happy Holidays,

Mark Sholund