67 rigger prop

[john schultheis]

Lookin to get back into the 67 size riggers I need a good starting size for a prop I used to run prather props but looking to get into the H series any info will be greatly appreciated Thanks

 

[Danny King]

h38

 

[bermudadude]

h32,h38,1667 cut to 64mm =all cupped to approx 5" give or take

 

[Marty Davis]

In stock form, the H32 is hard to beat.

I personally like the highly pitched up 1467 so that I can mill slow and accelerate.

 

[Elias Vazquez]

Agree w-the H-32.

 

[ALLAN YUEN]

Best of one very fast H-30 bore .187 shaft or 1662 more cupped about 4.7" great heat Good Luck!

 

[Chris Wood]

What boat and motor?

On my 60 crapshooter a h32 pitched up and tonguea cut off runs 90mph. With a cmb 67 greenhead and cmb bigbelly pipe at 11" long

 

[dr gary turner]

What boat and motor?

On my 60 crapshooter a h32 pitched up and tonguea cut off runs 90mph. With a cmb 67 greenhead and cmb bigbelly pipe at 11" long

Ran my C/S and tried my CMG with fat belly pipe instesd of my Picco 67 and I did not have radar but it was faster. H=32 Odonell 60%

 

[Ty Faust]

H32 has more pitch than H38,That is what I ran on my 67 Rigger.

 

[shoboat]

John,

What motor and pipe combination? Length of pipe is very important in your final

Propeller decision. H-32 is hard to beat with our latest profile. Doc's 67 shooter

Is one of the fastest heat racing boats in the country with an H-32.

Good Luck Testing,

Mark

 

[john schultheis]

motor is a CMB 67 EVO and the pipe is 10 3/4

 

[Marty Davis]

motor is a CMB 67 EVO and the pipe is 10 3/4

I think you should look at about 11 1/4" pipe length to start with.

 

[john schultheis]

Thanks Marty I have numerous pipes to try we'll see what works best come spring