20lbs of pure awesomeness ready to go!

[ChrisHerzog]

I actually have a few minor things left to do like set the struts and the needles but basically I’m ready to roll!!

 

[Shane Bastick]

Nice clean build Chris,
is that your own design, looks great, I like the center mounted rudder

 

[ChrisHerzog]

It’s an Ellison Rigger. Dan makes some really nice boats!!

 

[Michael Lewis]

Nice!!! Love to see some pics on the water when you get her dialed in.

 

[Brian Sorgente]

Very nice build, Chris. Well done!

Brian

 

[John Beardslee]

Chris, you might want to re-visit your antenna, it looks like you have the coax bent over and the cap holding it in place. With the 2.4 system the only part of the wire that is the antenna is the last 3/4” (approximately) that is stripped. It is recommended to keep that part at least 2 inches from any metal or material that conducts electricity. If that end breaks off from bending you won’t have any antenna and will loose signal. Many of us just oust the wire up in a the tube as high as it will go and tape it in place inside the lid so it can’t slide back down. Some also purchase longer antennas from Futaba to allow a higher mast and more flexibility in placing the antenna and having it high enough to be 2 inches away from the pipes or other conductors.
John

 

[Buckshot]

Cool

 

[rhomodel]

Interesting bottom of sponson / ride surface

 

[brad nichols]

Looks like a monster!!

 

[MarkDanielsSr]

Can't wait for Sunday !!!!!

 

[ChrisHerzog]

Can't wait for Sunday !!!!!

I started back on the two Scales this afternoon. Prepping the bottoms for primer maybe Saturday or Monday!

 

[Steve Stafiej]

I started back on the two Scales this afternoon. Prepping the bottoms for primer maybe Saturday or Monday!

Hay Chris i think you need a turn fin.

 

[ChrisHerzog]

Hay Chris i think you need a turn fin.

That will just slow it down!!!
It’s on today!

 

[Ray Sametz]

And don't forget a set of props. Have fun testing.

 

[ChrisHerzog]

Ok, I have addressed all the little trivial and really unnecessary issues you all pointed out. I now have a much longer Rx antenna (who need radio) I put a turn fin on the boat knowing it’s going to probably slow me down some and I finally put a couple screws on the back although the backs of the blades are nothing but drag. Just Joking lol, I think that she is ready!

With all that done, we did a final dress rehearsal. Now I just need to add water!

 

[ChrisHerzog]

 

[Daniel's Racing]

You have been busy. Awesome build Chris.

 

[ChrisHerzog]

You have been busy. Awesome build Chris.

Thanks!

 

[Paul Dadswell]

That looks awesome Chris.

 

[David Krienke]

Who sells that coil bracket so you can mount it to the pull starter bolts?. Love the sound of your boat . sounds mean.
Also I dont see any water to your pipe orings do they not need water when there is enough air blowing by them ?