101RS Seaducer 44" best pipe & props

[mark voorhies]

Got a 101RS goin in a Seaducer 44" hull, lookin for best pipe , prop combo's.

Thinkin MACS 15cc nitro pipe , is there more than one type?

props possible thinkin X462 pitched up, X465,ABC 2814, 3014?

Any suggestions?

 

[Ian Inverarity]

Mark,

The AL1 prop at the bottom of this page is VERY good on that combo:

http://www.cocrracing.com.au/propellers.html

Ian.

 

[shoboat]

Mark,

Ask Joe Warren what he runs?

I think one of my X-467B/C's work pretty well.

There is a few others that work well also, but I

think most go back to the X-467B/C, it is very

user friendly.

Good Luck Testing,

Mark Sholund

 

[Pumpin]

Mark,

Ask Joe Warren what he runs?

I think one of my X-467B/C's work pretty well.

There is a few others that work well also, but I

think most go back to the X-467B/C, it is very

user friendly.

Good Luck Testing,

Mark Sholund

hi mark kevin from aussie here just wondering if you have any of you 44 seaducer props ready to go and do you ad some more pitch to them???

thanks kevin.

 

[Jerry_Crowther]

Got a 101RS goin in a Seaducer 44" hull, lookin for best pipe , prop combo's.

Thinkin MACS 15cc nitro pipe , is there more than one type?

props possible thinkin X462 pitched up, X465,ABC 2814, 3014?

Any suggestions?

What I use is a X467 reduced cup and a Macs 13cc pipe set to 11 inches. The 101RS likes to rev so a short pipe and small prop is the way to go. If anyone has ever seen my 101 mono they know it is very fast. B)

Jerry

 

[mark voorhies]

Mark,

Ask Joe Warren what he runs?

I think one of my X-467B/C's work pretty well.

There is a few others that work well also, but I

think most go back to the X-467B/C, it is very

user friendly.

Good Luck Testing,

Mark Sholund

hi mark kevin from aussie here just wondering if you have any of you 44 seaducer props ready to go and do you ad some more pitch to them???

thanks kevin.

Hi Kevin,

The boat is still in the building stage, won't be testing it till spring here.

 

[mark voorhies]

Mark,

Ask Joe Warren what he runs?

I think one of my X-467B/C's work pretty well.

There is a few others that work well also, but I

think most go back to the X-467B/C, it is very

user friendly.

Good Luck Testing,

Mark Sholund

Mark,

Sounds like a prop I will have to try, Joe and Jerry are a couple of the fastest, so put me on the list for one.

Done testing for the year, but will be ready come spring. When ever you have one ready , I'll take it.

 

[shoboat]

Mark,

Not a problem, I will put you down for one.

Thanks For The Order,

Mark Sholund

 

[shoboat]

Steve Winks,

Yours are on the way today.

Thanks For Your Patience,

Mark Sholund

 

[Andy Greene]

Steve Winks,

Yours are on the way today.

Thanks For Your Patience,

Mark Sholund

So Mark , what's this mystery prop for that application I see floating around in D-3 ??? :huh:

Andy

 

[mark voorhies]

Steve Winks,

Yours are on the way today.

Thanks For Your Patience,

Mark Sholund

So Mark , what's this mystery prop for that application I see floating around in D-3 ??? :huh:

Andy

I am not sure at this point,, only tested once so far, but I will runnin the x467bc this wk. end

I think that will be my prop on the 101Rs Seaducer 44". This test wk. end will tell?

Wrong Mark, but take it for what it's worth.

 

[Craig Knight]

Mark,

The AL1 prop at the bottom of this page is VERY good on that combo:

http://www.cocrracing.com.au/propellers.html

Ian.

I agree with Ian, definately worth a try. You will like the results.

Craig

 

[Joe Warren]

Steve Winks,

Yours are on the way today.

Thanks For Your Patience,

Mark Sholund

So Mark , what's this mystery prop for that application I see floating around in D-3 ??? :huh:

Andy

Andy I gave Gene Mongar a Mark Sholund B/C X467 @ Charleston. I`am sure he & Tommy Cardoso have tried to pull it. A few may have tried to copy it? But you can buy them thru mark sholund he has the numbers on the Spec prop for the 44 Seaducer W/ CMB RS101. it has the leading edge reduced greatly & the trailing edge V cut @ the hub.

 

[shoboat]

Joe,

I doubt they will be copied like mine.

I have found out a few new ideas that

make them even better.

I just shipped some over to Australia

to see how they work over on that side of the world.

Thanks,

Mark Sholund

 

[BigChuck]

Can I get one to try on my boat??? B)

 

[shoboat]

Charles,

You may need an update.

 

[Andy Greene]

Joe,

I doubt they will be copied like mine.

I have found out a few new ideas that

make them even better.

I just shipped some over to Australia

to see how they work over on that side of the world.

Thanks,

Mark Sholund

The fresh motor( gold head 90 Mongar/Simpson) is pulling your 467 sbc like nothing at 11 3/8 inches of pipe-

Care to let me try the new prop Mark ??

Andy

 

[shoboat]

Andy,

Too busy right now, you should go the next step up to

the X-470 V-cut, it will flat out haul the mail.

Thanks,

Mark Sholund

 

[Andy Greene]

Andy,

Too busy right now, you should go the next step up to

the X-470 V-cut, it will flat out haul the mail.

Thanks,

Mark Sholund

Busy is good.

 

[mark voorhies]

Mark,

Ask Joe Warren what he runs?

I think one of my X-467B/C's work pretty well.

There is a few others that work well also, but I

think most go back to the X-467B/C, it is very

user friendly.

Good Luck Testing,

Mark Sholund

hi mark kevin from aussie here just wondering if you have any of you 44 seaducer props ready to go and do you ad some more pitch to them???

thanks kevin.

Hi Kevin,

The boat is still in the building stage, won't be testing it till spring here.

Kevin ,

Been testing the X467 bc prop from Sholund, and that seems to work very well with the Macs 15cc pipe @ 11.5"

No cup added, that prop is working great!