Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
I also screwed the sponson insides to the side of the jig to lock them into position. I added some more stringers and took the hull off of the jig tonight in order to work on the bottom with stringers and such. I’m attaching a pic with the boat standing on the transom. Thus far, nice and straight and no discernible twist. I’m also going to add some smaller 1/8 square basswood to the frames going across to increase gluing area. Once the bottom and non trips are on, I’ll add fiberglass to reinforce key areas of stress. I’ll probably add some wood reinforcement as well in the area of the strut and around the stuffing tube and engine well. [ATTACH]335339[/ATTACH][ATTACH]335340[/ATTACH][ATTACH]335341[/ATTACH][ATTACH]335342[/ATTACH][ATTACH]335343[/ATTACH][ATTACH]335344[/ATTACH]
I also screwed the sponson insides to the side of the jig to lock them into position. I added some more stringers and took the hull off of the jig tonight in order to work on the bottom with stringers and such. I’m attaching a pic with the boat standing on the transom. Thus far, nice and straight and no discernible twist. I’m also going to add some smaller 1/8 square basswood to the frames going across to increase gluing area. Once the bottom and non trips are on, I’ll add fiberglass to reinforce key areas of stress. I’ll probably add some wood reinforcement as well in the area of the strut and around the stuffing tube and engine well.
[ATTACH]335339[/ATTACH][ATTACH]335340[/ATTACH][ATTACH]335341[/ATTACH][ATTACH]335342[/ATTACH][ATTACH]335343[/ATTACH][ATTACH]335344[/ATTACH]
