Search results

Now ive heard two different stories about offsetting the strut 1/8 ive heard set it off to the right and the left. Read down this page it says offset to the right rc boat hull attitude and i read it here deep vee setup im not liking the internet anymore lol.

mount strut to the left on the transom if looking at it from the rear? Ive read you mount it to the right? I tried that. it made it worse.

Thanks, I have been ill lately (passing kidney stones for the first time) so I haven't done much work on the boat project here. Im going to try the final relocation of the strut. then if that doesnt work look into another set of tabs in between the strut and outer tabs. And try some other props.

Just look up JPriami on YouTube got lots :D Pomenis is my YouTube user channel name too.

I have tried a 215, 220, 42x59, graupner 42,45 & 47mm m445 & m645. The props that didn't push the boat over 50mph no chine. Getting near 55 it chines. Mark do you know if that guy was running the stock motor and esc? Cause it's a 36/74 1600kv 2 pole in there stock.

Mark, what boat did you do that in? what setup?

Hello Timothy, Yes it does come with trim tabs. I have a pair of adjusters on it too. I have tried a little starboard trim down. Heres is some clips of things I have written so far showing the history to this project. The other day I thought I had the boat nearly dialed in.and ran the 58.9MPH...

Yes that would be it. Boat bounces from chine to chine.

Thanks for the info guys. I've got a little bit to report about today's test. I'll post later when im on a pc. On my phone now.

I have been modifiying one of the traxxas spartans. Leopard 4082 1500Kv, T-180 esc, S+B+P M645, Speedmaster dual pickup rudder, etc, I am having issues with chine walking above 55mph. It has been suggested that the strut & stuffing tube being mounted at the lowest possible point in the bottom...

Traxxas has been having lots of issues with this boat. There are simple fixes for it. The main problem being the cooling system with the rudder inlet. It needs to be opened up. Not a big problem. But some have bad motors and esc's that seem to be intermittent to catching fire. This being the...

Im looking for a 67-19x3 blade prop. Pref stainless. Sharpened,balanced & polished.

Used Areomarine Sprint cat. It was a racers boat who lived in Louisiana originally. I bought it off of him to start a project but have lost interest in the project. This boat comes with the hull, fuel tank, JR Pro 3ch radio system, 3rd channel remote mixing valve/needle (its purple). I have 2...

Bought it nib off eBay last year. Did a break in. But had trouble fine tuning it for use on my sprintcat. Lost interest in engine and boat. Comes with a pipe too. Not sure what kind.will email pics. Not sure what to price this at so email or pm offers. [email protected]

Thanks for the advise.

Im not looking to run it in some class with other people. ;) Just wanted some advise about the questions I asked. And being it came as an RTR originally. I figured this section was where I should post. Sorry if it seems it dosent belong here? Even though I'll probably be removing the stock...

Venoms King of Shaves Venoms King of Shaves online This is a nice looking RTR form venom. Comes with a 26cc gas engine thats similar to the 26cc sikk engines. but its only 2.0 hp I plan on putting the sikk 26cc 4.5 hp engine in it. or maybe the 27cc but its only rated at 4.2 hp. I wanted...

I may need that if previous person ^ changes their mind. LMK [email protected]

How much fuel has been run through the CMB?

Can anyone help me with a baseline setting for the LSN & HSN on the carb for this engine? I’m having some trouble trying to get it dialed in. From reading a few post above I guess I should try turning the LSN way out or just remove it?