Search results

2 new $25 each, 2 used $15 each, 3 new collets $5 each, 1 used $3. All items are plus shipping.

$20 plus shipping

Case tweeked, but good for set up during construction $30 plus shipping

$140 plus shipping

Kit tests for 0-100% nitro. Comes with thermometer and temperature conversion tables. This is a kit that's great for all types of RC categories that use lower nitro % in airplanes and helicopter, mid-range nitro % in cars and high-percentage in boats. These kits are currently selling for $385...

New P/L (liner deburred, piston skirt radiused, lapped in), rod, wrist pin, balanced crank, WIB bearings, Rod needle bearings, head clearance at .015. $375 plus shipping.

Motor has had the liner deburred, the edge of the piston skirt radiused, Piston/Liner lapped, Drum and front case to main case matched for better fuel flow, case sonically cleaned and the unmachined parts lightly polished, new WIB bearings, balanced crankshaft. Head clearance set at .016 $600...

$45 each per set of base and needle, plus shipping.

$50 a set plus shipping

Carbs with low-speed needles, $60 each plus shipping. Carb w/o low-speed needle $35 plus shipping.

4 blocked off for remote needles, 2 with stock needles. $80 each, plus shipping.

HI Phil, I will take it to the Post Office tomorrow and get you a tracking number.

SOLD

Yeah people generally think I look younger than I am. Being chubby helps, not many wrinkles! Those are all nitro boats based on Jeff Snell's designs. I have a Blue Speedy nitro as well. I laid up two of them and Jeff laid up two. The Red Speedy and the Executone are bagged and heat cured carbon...

Well, the gas scale boats out here in the Pacific NW are just as fast or faster than 80% of the scale nitro boats and getting faster all time, $37 a gallon for 66% nitro fuel, less finicky motors and I"ll be 70 in a couple months and just need to simplify my racing program. I'm at the point now...

Hi Phil, I am transitioning from nitro to gas so I have one for sale. It has an extra NIP case (they are prone to cracking), the protective case, with the charger and I installed a locking clip on it. These pieces are great. I only charge mine 2-3 times a season. $110 plus shipping

These wooden boat stands (or bunks) are made from 1/4" Baltic plywood and only weigh a couple of pounds. From experience I found that extra caution is needed when pitting on sloping ground. The footing is less certain and the chances of the pit man whacking the prop is higher. I was at the UNW...

I also saw a stub shaft break off at the back of the strut and the prop went rattling around inside the guard and then dropped harmlessly to the ground. It certainly would have gone flying if there wasn't a guard enclosing the prop. Turns out this particular new guy was using the 3/16ths music...

I will take the package for $200

Looks like a solution in search of a problem.🙂