Search results

Is there a radio box?

If your able to print in ABS, why go backwards to PETG. I haven’t tried ABS yet

Are both materials warping? PTEG and PLA can have very different solutions for bed adhesion. I've not had many adhesion issues with PETG other than bed leveling and Z axis height for the first layer. Are you sure your bed is level and the first layer is close enough to the bed? you want it...

It sounds like your having bed adhesion issues. Changing the wall thickness will have little to do with warping. What material are you printing and what surface type is your heated bed?

Based on the exploded view on the site: NV01001 M3.5X18 Head Screw

Wall thickness will be determined by your nozzle diameter and number of walls. I assume the your nozzle diameter is .4mm. .4mm x 6 walls = 2.4mm wall thickness I just happened to be making some parts this morning. This image show a setting of 3 for number of perimeter walls. That would...

From what I can tell and based on the second picture, they are both 4050’s and one is 1700kv and the other is 2050(ish)K just realized there was a third motor.

Just a thought... Can you solder in a reducer bushing into an existing .187/.187 unit?

Thanks Tom, I initially didn't see them on the left side of the chart. Thanks!

What are the OD0100's? Not heard of those

Thanks for the photos Mario!

I have a goal of getting to Nylon. Although, it does seem like a nightmare to get set-up and keep running. I am not sure I print enough stuff to warrant the headaches. I have read good feedback on the Prusament PC Carbon Blend. That might be my next step...

Another fantastic event with fantastic friends and racers! Always enjoy this fall event. Thanks to all that make these races happen. The hard work and dedication to the hobby shows. Thanks RCRC!

I guess I have been pretty lucky. The only real issue I had with PETG was getting the first layer to stick on the OEM build plate. That was resolved by an after market printer plate from Printed Solid - 3D Printers, Service, Training and Supplies I don't have my settings committed to memory...

I am truly sorry to hear about ****’s passing. I have fond memories of Mr. Jones as an impressionable young kid. In particular, during the years of the Indy Unlimited and our group of model boaters staying at the same Red Roof Inn. As many have mentioned Simon Says, water guns, and his red...

Good luck and stay safe down there!

TJ, How about $70 and I will pick it up in October?

Thanks for the effort! This is always a very enjoyable race to attend!

I am curious to know where you personally witnessed this?

Hey Fella's, sorry for the late reply... Can you please enter me in the following classes IMPBA - 19339 B Hydro - DSM 1/8 Scale - DSM