Search results

Be careful if you use red spot putty don’t put it on thick if you do it shrinks and cracks lite applications and let it dry overnite.Sand it with 220.Do that till you think you have all pin holes filled then prime if using rattle can primer make sure you get the automotive sandable kind.Dont...

The blower and zoomys look awesome!Now for some nice weather.Im also needing to do some painting ended up with 22 inches of some and now we’re going to get some minus temps.

Started on it Christmas weekend I didn’t like the servo mounts hard to get them screwed in so I went with my standard servo cross mounts I always make.Using a oiler so I modified the stuffing tube mount.I hate gas bags so I used the Sullivan vee hull tank with removable cross brace.On the...

Turned out real nice!

I’m going to try a oiler on my slingshot I always been a grease the shaft theory.The only thing I have noticed is the oiler can be a mess using castor oil it can get in the hull the seaducer I rebuilt had a oiler so I clean the inside with lacquer thinner to make sure when I painted the hull...

I will pass not sure if it’s too much for my hull

Top container second row from bottom 1445

Looks like a pita to learn and setup.Price is good.I looked at the manual there’s a lot too learn.Differant terminology to what I’m use too only time will tell.

Do those fit into your truck receiver?

Sounds good Wally did you finish the whiplash sport 20

I’m not a big fan of the rust oleum had better luck with krylon I stick with automotive products and use a compressor and gun.Too much work goes into the wood boats to have something backfire at you.

Phil I’m going to try testing the seaducer with the cmb a few more times but I think it’s way too much for that hull I also have my scratch built rigger and in the process of building the kit slingshot.Heres the two boats I built in 2022 that I still have The wood mono is also scratch built.

Thanks the two whiplashes and slingshot are scratch built the warlok is a kit the seaducer was wrecked ready for the dumpster.

2023 was a great year for me as far as rc boats built a few and repaired one.Was a trying year as lost my brother and are Maltese.Im back as far as model boats goes I’m going to renew my impba membership.Heres what I built.

Looks like you should be in the furniture refinishing business.Are you going to use some high build primer after you get it resealed?By the looks of it should turn out real nice.

I’m with Mike that angle at the prop is going to cause running issues.I would pull the drive line out all of it including the strut then put a piece of 11/32 tubing for the new drive line it needs to come out just past of the slot then you can slide a piece of 5/16 tube in the 11/32 stuffing...

The zenoah should run real good with a blower and zoomies lol

Looks real strong with the glass job.Once painted will look nice again.

Adam came over to pick it up we test fired the engine pulled the plug choked the carb till fuel was coming out the plug hole insert the plug thing fired right up.Checked to see if if radio would shut it off it did.Refired it up set the low speed Adam was happy.Now time to build the kit slingshot.

Now your talking should be plenty of power did you get bigger tanks?