Search results

Gday , i have a 06 cmb 101rs , yeah the crappy one with the AAC liner. fuel is 50% as it dosent go well on 25% (not like i want it to) ok , so i have the motor running pretty well in a mono , i can get it to second stage , and its pulling pretty hard , but when i pulled it down it had one...

Try a -ve angle of around 3 deg down on the strut , and heaps of front aoa on the sponsons , i have run v9's on the ffr and it works !! it hops till about 1/2 throttle , then picks up. dont worry about high aoa on the front , the back will lift enough to correct it and it will ride neutral on...

Bring on the steped mono's i would imagine a Steped seaducer or insane would be agian the front runners..LOL's its the next "step" thats for sure .....groan LMAO Jason

hi gooey , you dont want to race that with a hawk , mate different generation of hydros there .. the FF 45 will be scarey fast .. and make the hawk look really old lol's Jason

try a mc 59 plug , sounds like the plugs are to cold to me. Jason

proper rige didge , low nitro buttons for the cmb 100 and also the 90 and hr91 i used to have a full set of buttons for my 90 ops and it made a big difference swapping to a shallower buttons on lower nitro . i wouldnt mind a shallower mirror finish button for my 100 cmb rs Hint Hint Jason

Thanks guys this is a very good topic !! great info , and pics! curious where to get those connectors in the pics here in oz ?? i am running everything up under the deck , with my 30" 6s2p setup and i cant keep it on the water now. how the heack are you guys keeping them on the water with...

very nice .. its awesome when stuff like that rocks up in the mail !! gee i wish i had your mailman !!! Jason

probably a prather 215 or 220 , and a occ x440 x3 if it will pull it . any pipe will do ok on it. but you need a RE engine if you really want it to boogy Jason

Hi lorenzo , i have also noticed the motor seems to breathe better on a long pipe . like the transfers start to work ...etc .. it seems to pull harder , but common info tells to run a mega short pipe to get that speed ... its a stock motor , i am confused as to why a stock motor likes such a...

OK so i shortened the pipe up to 7 then 7 1/4 and gave it a run with 1445 , a h4 and the h7 the 1445 and the h4 certinally got the rpm UP ! , but the water speed was always UP with the h7 it went out and screamed for 3 laps then went of the pipe. the gallary behind me were all telling me to...

In the heli world , thats a realy realy realy old clip , i dont think that he flys align electrics anymore. its cool , i know cause i have two of them setup like that , totally mad3dz.. i can fly ok , but he is one of the best , there are much better vids out there now. check out these...

would deregulating the hull rules a little help to stimulate some new growth on the mono front and allow some new boats to be built ?? i have always looked at the stepped monos as being the next level in speed and drag reduction , but our OZ racing rules stricly forbit it . over here in oz ...

looks great , looks like a FFr, with a splash of avenger in it ... cool Jason

thanks guys as always i have some stuff to try now. aaron can you do the head clearance ?, i have no idea how to get such am accurate close clearance on such a small engine .. Jason

dont know about online but RF fibreglass supplies carries it . ask for the light stuff or they will send you the gear to lay up full sizeboats.. LOL's Jason

hi tim , im not a huge fan of the ms21 , i much prefer the td21 , its got herbs i used to pull a v945 on my FF21 with the same engine and a TD 21 pipe. !! i might have seen an honest 70 with that setup , raspy rich not an ideal race setup , but if you could get clean water it stayed hooked up...

The head clearance is stock , can i pull a shim or would it need machining , it is an AB H7 at 46 mm, 82 mph wow that would be a dream... LOL's i am getting more around 62 mph ... :lol: i am running a Spp ms21 pipe, what would be the best AB pipe on the motor in that hull with that...

Gday , i have a sgx 21 , for some reason its got sgx-1 on the side of it , but i think its just an sgx. i am pretty happy with it. after the mac 21 wore out i went to a green head valv, and have been running it on 60% with an 'AB' h7. its ok, but it runs really flat .. i have scuffed up the...

Gday , i have a mac 67 blue head and i have around 3 broken head studs in it. YAY... i have extracted the head studs after a lot of time ... now what threads are these things supposed to be ?? they are 3/4 inch long , by???? would SSteel be ok for a replacement. Thanks for your help Jason