Insane T2 Engine Mounting Templates

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

David Santistevan

Well-Known Member
Joined
Aug 5, 2011
Messages
1,401
These are a couple of new printing projects I just finished. This is an engine mounting system for the Insane T2 and Altamotive's solid shaft setup. It insures perfect alignment using drop mounts. The first item is for marking your drill holes once you are comfortable with the transom distance. The arrow on the left indicates center of plug so all you have to do is measure your distance from the transom and mark the rail. Then set this between the rails and align the arrow with your mark. The second drawing is setup so you can drop the engine on to the mounting template and align the arrow with your rail mark and then you can insert the alignment tool or wire in the collet to perfect your alignment of the hull penetration for the stuffing box. This sets a perfect ~1.4 degree angle for the motor.

1734006108344.png


1734006232512.png
 

Latest posts

Back
Top