- Joined
- Dec 22, 2003
- Messages
- 4,178
Tin for me if it has to be a metal tank. PTFE is my current favorite.
walt tank needs repair
- Thread starter raceready
- Start date
Help Support Intlwaters:
Terry Keeley
Well-Known Member
- Joined
- Jul 24, 2002
- Messages
- 7,181
0.007" annealed stainless shim stock and Kester silver solder for me...
Last edited:
- Joined
- Dec 27, 2001
- Messages
- 9,733
Dave,
I tested a number of different internals and found that a baffle worked as well or better then a internal tank.
WAY back in the stone ages I sent a few tanks to Dick Jones to try some out with on his larger engines too. We gained more information from that as well.
I dont have a picture here but let me look around at home and see what I can find.
Grim
- Joined
- May 2, 2008
- Messages
- 174
fixed the tank after putting some pressure in it, found a small pin hole in the bottom corner,
got the gun out fluxed , soldered repressured all good. I've made tanks in the past , just tried something
different. thanks for the help. Chris
got the gun out fluxed , soldered repressured all good. I've made tanks in the past , just tried something
different. thanks for the help. Chris
Similar threads
