F/S NEW ABC PROPS IN STOCK

BAM RACING PRODUCTS HAS A LIST BELOW: All prices do not include shipping. Nor the 3% for fee's if paying by PAYPAL to ([email protected]), or money orders accepted to Alan Elzer, 2122 N. State Route 61, Boonville, IN. 47601 Cell # 812-453-8137, leave a message. We'll call you back as soon as possible.
Our Blue printed props are Sharpened & Balanced, Blades are all Identical in shape at an extra cost, Message us what you want and how many.

TYPE AMOUNT RETAIL
40 X 53 5 $30.00
40 X 52/3 5 $35.00
1514-17-45(2) CLL 3 $30.00
1515-17-45(2) CLL 3 $30.00
1516-17-45(2) CLL 1 $30.00

1515-19-38(2) CLL 3 $30.00
1517-19-38(2) CLL 4 $30.00

1515-23-47(3) CLL 3 $30.00

1615-19-38(2) CLL 4 $30.00
1617-19-38(2) CLL 4 $30.00

1615-17-45(2) CLL 4 $30.00

1614-15-65(3) CPL 4 $35.00
1615-20-65(3) CPL 4 $35.00

1615-23-47(3) CLL 4 $35.00
1615-23-50(3) CLL 4 $35.00

1715-19-38(2) CLL 4 $30.00
1717-19-38(2) CLL 4 $30.00

1714-17-45(2) CLL 4 $30.00
1715-17-45(2) CLR 4 $30.00
1716-17-45(2) CLL 4 $30.00
1717-17-45(2) CLL 4 $30.00

1715-23-50(3) CLL 4 $35.00
1717-23-50(3) CLL 4 $35.00

1815-19-38(2) CLL 3 $30.00
1817-19-38(2) CLL 4 $30.00

1814-17-45(2) CLL 4 $30.00
1815-17-45(2) CLL 4 $30.00
1816-17-45(2) CLL 4 $30.00
1814-17-45(2) CLR 4 $30.00

1814-15-60(3) CLL 4 $35.00

1815-23-50(3) CLL 4 $35.00
1817-23-50(3) CLL 4 $35.00

1915-23-50(3) CLL 4 $35.00
1917-23-50(3) CLL 4 $35.00

1914-15-60(3) CLL 4 $35.00

2015-19-38(2) CLL 5 $30.00

2115-19-38(2) CLL 23 $30.00
2117-19-38(2) CLL 2 $30.00

2217-19-38(2) CLL 3 $30.00
2219-19-38(2) CLL 3 $30.00

2215-23-47(3) CLL 3 $35.00

2315-19-38(2) CLL 4 $30.00

2315-23-47(3) CLL 4 $35.00

2716-15-50(2) CCL 4 $35.00

FINISHED PROPS

OCTURA
X 640 1 $30.00
X 642 1 $30.00
M447 1 $30.00
1515-19-38(2) CLL 1 $50.00
1517-19-38(2) CLL 1 $50.00
1814-17-45(2) CLL 1 $55.00
1814-15-60(3) CLL 1 $55.00
1814-17-45(2) CLR 1 $55.00
1914-17-45(2) CLL 1 $55.00
2117-19-38(2) CLL 2 $55.00
2114-17-45(2) CLL 1 $55.00
2514-15-50(3) CLL 1 $70.00
2614-15-50(2) CLL 1 $70.00
2517-15-75/3 1 $70.00
2614-10-75(3) CLL 1 $70.00


PS: WE'RE CONSTANTLY REORDERING PROPS SO IF YOU DON'T SEE WHAT YOU NEED PLEASE LET US KNOW.

Alan,

I would like to buy 2-1915/3-23*-50%
Can you give me a total with shipping
Please? They are for a customer without
A PayPal account. Postage is to zip code
49685-7266

Thanks,

Mark Sholund

shoboat said:

Alan,

I would like to buy 2-1915/3-23*-50%
Can you give me a total with shipping
Please? They are for a customer without
A PayPal account. Postage is to zip code
49685-7266

Thanks,

Mark Sholund

Click to expand...

Sure will

Thanks Alan,
I do have one question for you.
How do you modify the rake angle from 10* to 15*?

Mark

shoboat said:

Thanks Alan,
I do have one question for you.
How do you modify the rake angle from 10* to 15*?

Mark

Click to expand...

Grind more angle.... "correction here this comment wasn't meant to change the rake angle" but just to change the load.

You can cup the tip of prop which will add rake which would be like a curved rake instead of a straight rake angle ,grinding would take a lot of blade away .Im no expert on props still learning.That is if your looking for more rake.Easier to order the correct rake prop to begin with.

Here’s a picture of what I’m saying

I have never heard of reducing the trailing edge to increase the pitch. It is in the leading edge.

It’s rake that Mark was asking he was wanting to know how to increase the rake from 10 to 15 degree

Here’s another article about modifying rake

Boaters,

The answer is: you cannot increase rake angle
from 10* to 15* without cutting off the blades and
Reattaching them at the new rake angle. Some
believe back-cutting the trailing edge increases the
rake angle of the propeller, it does not.
It can reduce lift and blade area ratio however.
It usually removes quite a bit of trailing edge cup
depending on how much is ground off the trailing edge.
I only asked the question because it is not a true statement.
Correct information can be found if you research propeller
designs. ABC Propeller in Columbus, Ohio has been great
to the RC boaters for years. Jim has made plenty of different
Rake angle, blade area ratios, and most of all so many different
sizes available to us all. For the last 26-years there is no other
Company that has done what Jim has done for our hobby.

Thanks Jim For All You Do For Us RC Boaters,

Mark Sholund
Props-4-U

shoboat said:

Boaters,

The answer is: you cannot increase rake angle
from 10* to 15* without cutting off the blades and
Reattaching them at the new rake angle. Some
believe back-cutting the trailing edge increases the
rake angle of the propeller, it does not.
It can reduce lift and blade area ratio however.
It usually removes quite a bit of trailing edge cup
depending on how much is ground off the trailing edge.
I only asked the question because it is not a true statement.
Correct information can be found if you research propeller
designs. ABC Propeller in Columbus, Ohio has been great
to the RC boaters for years. Jim has made plenty of different
Rake angle, blade area ratios, and most of all so many different
sizes available to us all. For the last 26-years there is no other
Company that has done what Jim has done for our hobby.

Thanks Jim For All You Do For Us RC Boaters,

Mark Sholund
Props-4-U

Click to expand...

I'll second that about Jim, great guy and a wealth of information at your finger tips !

Alan,
Please order me the following props when you place your next order:
(4)ea 2819-19-38
(4)ea 2817-17-45

PayPal has been sent

Alan Elzer said:

Grind more angle

Click to expand...

Hummmm?

Buckshot said:

Alan,
Please order me the following props when you place your next order:
(4)ea 2819-19-38
(4)ea 2817-17-45

PayPal has been sent

Click to expand...

Thnx for reaching out to us. But I'll have order them but I have items on back order now. Got your payment to

There is a way to affect a change. It will move the blade for sure. The rake angle may or may not change a great deal, not to the numbers stated.. but you will get more.
Mark, we talked about it a Long time ago..
But for the most part it is a QWICK fix, if you want to load or open the prop.

Charles,

It does not change the rake angle what I do to
the leading edge though. You are right it opens
up the blade more. For more performance you
can increase the center of blade pitch as well and
it does change the blade progression of the face
of the propeller. Lots of tricks in the bag .

Thanks,

Mark

Hi Alan,

Can I place an order for these from you? 1919-17-45 2 blades, both L & R

If you can prepare them for fast electric pure SAW cat. (circa 45krpm loaded) would be great, otherwise I'll take them raw.

I believe they are new props, I haven't seen them yet but would like a set.

Sure can I'll add them to an order that's in now.
Thanks for reaching out to us.
They $30 each so if you would send me a deposit for $60 would be appreciated. Balance due when ready to ship. It's $25 each to blue print them or finish.
My paypal is ([email protected]) ff or add 3% for fee's
I'll need your address at some point.
My cell is 812-453-8137 if you need to talk

Alan Elzer said:

Sure can I'll add them to an order that's in now.
Thanks for reaching out to us.
They $30 each so if you would send me a deposit for $60 would be appreciated. Balance due when ready to ship. It's $25 each to blue print them or finish.
My paypal is ([email protected]) ff or add 3% for fee's
I'll need your address at some point.
My cell is 812-453-8137 if you need to talk

Click to expand...

Hi Alan-

Need (1) 1915-23°-.50(3) CLL and (1) 1917-23°-.50(3) CLL....RAW.

Thanks -
Tim