• If you have bought, sold or gained information from our Classifieds, please donate to Int'l Waters and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Parts For Sale OS 21xm/RG pistons and sleeves

Intlwaters

Help Support Intlwaters:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

BradSpencer

Well-Known Member
Joined
May 7, 2009
Messages
890
Selling as a lot.
$300 US shipped with tracking.


- 2 x used 21 RG sleeves with new pistons(one has an RG piston, the other a 21 xm piston). Turned down to fit 21xm, will require sleeve/head shimming to desired port timing.
- 1 x used sleeve and new 21xm piston. i forget what this sleeve is from, will not fit 21xm without modifications. Possible from a RZM or RZB?
- 1 x NIP RG piston and sleeve. Discontinued unobtanium. Will require modification to fit 21xm
- 2 x new 21 xm pistons.
- bunch of G clips.

Payment by paypal, allow a few days to be shipped with tracking
8B5682CA-4941-4E55-B2FF-36A6D31F2D9D.jpegE8CBC7A8-CAAE-4DDD-82B4-FB53A5E1836F.jpegA9F66EB1-6FEB-4539-AB92-8D59A8A9F024.jpeg
 
Just found these two used RZM pipe timed piston/rod/liner sets I will also include in this lot.
Little use with plenty of life left.
24C280C7-D72E-4B50-8A89-347CB048CFCA.jpeg
 
Alan you be willing to part with the used rzm cylinders you bought from brad ? or do you have any good used cylinders you will not be using ?.
Dave said he would look if he had anymore sleeves I just came to my senses too late and realized what I wanted to try was going to be too much work .
 
Last edited:
Alan you be willing to part with the used rzm cylinders you bought from brad ? or do you have any good used cylinders you will not be using ?.
Dave said he would look if he had anymore sleeves I just came to my senses too late and realized what I wanted to try was going to be too much work .
I'LL LOOK TO SEE IF I HAVE ONE THAT'S USEABLE.
 
Ok thanks alan. I would take both of them only if you wont use them .the ones he said were still good in the second pic above he said the would throw in. I am not going to open this old rg motor I guess. It cost so much I should probably sell it back on to ebay. I will have a brand new abn cylinder and rod when I take this new engine apart if you would want to do some kind of trade or something.
 
Back
Top