KEP's T3 Freebie

Niklas Edlund · Dec 20, 2015

Ive just uploaded the new Freebie drawings of the KEP's T3-21 Outrigger Nitro Hydro.

http://www.ne-stuff.net/2015/12/keps-t3-21-freebie.html

There will be a T3-45 Freebie also but that wont be ready for publish until a couple of months form now (hopefully).

Here is a link for the KEP's FE-4SL Freebie Electric Outrigger Hydro (P-Limited):

http://www.ne-stuff.net/2015/11/keps-fe-4sl-freebie.html

There will also be an KEP's FE-4S (P-Open) and that is scheduled for "January" 2016 (hopefully).

Happy building!

/Niklas

brad nichols · Dec 20, 2015

Greg has already requested one!!

Brad

Tom Foley · Dec 20, 2015

Thanks !! You are a great contributor to the hobby !

brad nichols · Dec 20, 2015

Niklas is the turn fin on the T3 drawing the one that is also for the T2 or if not could you send me a drawing for it? { [email protected] } Thanks and have a MERRY CHRISTMAS and HAPPY NEW YEAR!!!! Thanks for the free drawings so we can build boats from plans!!

Brad

Niklas Edlund · Dec 21, 2015

Brad: the T3 fin fits the T2 but its slightly deeper as its mounted a bit higher up.

Ive attached an pdf of a "T3-21" turn-fin adapted for the T2-21.

T2-21-fin-2015.pdf

Geraghty · Dec 21, 2015

Niklas....

Kudos to you...Keep encouraging the RC boating community by giving them a very competitive option at a much

lower cost .....

The skills a competitor attains by building a competitive a boat far outweighs the the skills of writing a check.....

Rod Geraghty

Niklas Edlund · Dec 21, 2015

Geraghty said:
Niklas....

Kudos to you...Keep encouraging the RC boating community by giving them a very competitive option at a much

lower cost .....

The skills a competitor attains by building a competitive a boat far outweighs the the skills of writing a check.....

Rod Geraghty

Hi Rod, Thanks for the kind words!

Shane Bastick · Dec 22, 2015

hi Niklas,

thanks again for supplying a fantastic new 21 rigger plan to the rc boating community, gives great inspiration for the scratch builders out there to get building, cant wait to build it

cheers

Shane

RaceMechaniX · Dec 23, 2015

Excellent work as usual Niklas!

Butch Londrigan · Dec 23, 2015

Thanks Niklas. Looking forward to building one of these. Thanks for what you do for our hobby. Hope you have a great Christmas and New Year.

Niklas Edlund · Dec 23, 2015

Thanks Guys and a Merry Christmas to you all!

ian thompson · Dec 24, 2015

Hi Niklas, Thanks so much for publishing this

. Just wondering do you have the drawing in a .dwg or .dxf format ? I have just built a CNC router & want to try cutting the bits out on it

I have the software to put tool paths on these formats but not on pdf`s.

I know there are PDF converters available but i havent used one & Im not sure which is the best..

Merry Xmas to you & all the best for 2016

Thanks again

Ian

the german · Dec 24, 2015

Great job Niklas !

Merry Christmas to you.

Guess you guys have a lot of snow in Sweden

Alex

Niklas Edlund · Dec 25, 2015

Shane William Bastick said:
hi Niklas,

thanks again for supplying a fantastic new 21 rigger plan to the rc boating community, gives great inspiration for the scratch builders out there to get building, cant wait to build it

cheers

Shane

Thanks, keep me in the loop on the build!

Niklas Edlund · Dec 25, 2015

ian thompson said:
Hi Niklas, Thanks so much for publishing this . Just wondering do you have the drawing in a .dwg or .dxf format ? I have just built a CNC router & want to try cutting the bits out on it I have the software to put tool paths on these formats but not on pdf`s.

I know there are PDF converters available but i havent used one & Im not sure which is the best..

Merry Xmas to you & all the best for 2016

Thanks again

Ian

I'll check doing some dxf/dwg's on the templates. I'll get back.

Niklas Edlund · Dec 25, 2015

the german said:
Great job Niklas !

Merry Christmas to you.

Guess you guys have a lot of snow in Sweden

Alex

Noooo Snow in sight here. A week or two ago we had the same temperature as "mid summer" (end of june)... ;(

Shane Bastick · Dec 26, 2015

Niklas Edlund said:
Shane William Bastick said:

hi Niklas,

thanks again for supplying a fantastic new 21 rigger plan to the rc boating community, gives great inspiration for the scratch builders out there to get building, cant wait to build it

cheers

Shane

Click to expand...

Thanks, keep me in the loop on the build!

Will do

Merry Christmas and all the best for the new year

Niklas Edlund · Dec 26, 2015

Check if any of the two files in the attached zip file work - dwg & dxf.

Note the lower of the two ski side profiles is the optional ski, the upper one is the std ski.

KEPs-T3-21-templates.zip

Niklas Edlund · Dec 30, 2015

Niklas Edlund said:
Check if any of the two files in the attached zip file work - dwg & dxf.

Note the lower of the two ski side profiles is the optional ski, the upper one is the std ski.

Anyone checked if the dwg or dxf templates files are ok for cnc cutting?

TrentTrelaw · Dec 30, 2015

I was able to open the dxf in Rhino 3d.

If it opens in Rhino, I can laser cut it. I don't see any problems this end.

KEP's T3 Freebie

Help Support Intlwaters:

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Attachments

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Attachments

Well-Known Member

Member

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!