Search results

Yes you can go with two 2S batteries. Ideally you would be looking at 5.5k mah and 70C . That is what I run. Those that have seen my Winston know it is fast. I think it has only lost in the final three times in the last 3 years. https://www.roaringtopusa.com/in-stock/70c/70C-5500MAH-2S-LIPO...

Joey, Your G30 cowl is in the mold. Payment details sent in PM. Joel, Tim Started work on the new mold. Stay tuned for updates on the 45 cowl. Jon, I will get the mold out and get it ready for lay up. Mike

I just use the cheap 1" brushes you can get from home depot. I ordered them on Amazon thou to get the price break. I think last I paid 34 cents a piece. For sealing the outside of boat, I pour on and use a scrap piece of wood to spread the epoxy around. I scrap it back off into the mixing cup...

I am old school. I have an altimeter from an F4 phantom. I can watch the altitude change during the day. I never adjust the barometer setting. Lower the alt, the better the air. It normally sits around 250 feet at home. I have seen it got from -200 to 1200 in my racing career. I aslo have a...

With that vented hull and the CG so far back, you will need some prop to keep the back of the boat up. You are carrying lots of tail weight. Removing the tail feather will help with that to begin with. I would suggest a 3 blade prop. Something in the 1.7 inch range with that amount of KV. Did...

Zip says For stock engines,the tuned length for this pipe is exactly 13.5 inches from the face of the exhaust port (measured around the header, on the centerline). For modified engines, start at 13.5 inches and shorten from there. The pipe is very sensitive to length. Shorten 1/8 inch at a...

Here is a thread of my 91 winston eagle. Pics for ideas. This is a ML boatworks hull. https://www.intlwaters.com/threads/91-winston-eagle.79025/ Mike

Sent you a PM with my number. Give me a call and we can go thru the measurements. Mike

Got home early Friday. Shot some primer on a few projects. Got color on some parts on Saturday. Shooting some masked color and 1/10 scale hull today.

I got it from Secraft a year or so ago. http://www.secraft.net/shop/step1.php?number=1579&ckattempt=1

Here is the 2 links to them. One is course thread and one is fine thread. Course - Briggs & Stratton, Scepter, and Midwest https://ai13.us/collections/frontpage/products/coarse-thread-cap Fine - BLITZ or GIANT LOOP https://ai13.us/collections/frontpage/products/blitz-cap

YES, any white gas.

Here is my set up. Once you go E pump. You will never go back. Great for getting air bubbles out.

Good luck, I just switched over from PPG. Their pricing is outrageuos. My local supplier does not carry it anymore. Switched to Axalta Revial. Shoot it for the first time this weekend. Mark Anderson has been having luck with his boats for a while now.

You might even be able to pull a 2817 with that motor. Should be fun. Post a video please. Mike

Joel Yeah I can do that. It will be a bit to get them done. Just to be sure the cowl height is 2 1/8. This is what the size of the abs cowl was when I pulled the mold. The newer style SGX is 1/4 smaller on height. If that is ok with your boat, then I can get going on them. The other mold will be...

Joel 17.25 oval from end of pipe shroud to the tip of the mold. The motor center is 10.5 from the tip of the mold. I have something in the works that will be longer. But it will be some time before that is available. Mike

Nice to see it get back in the water. Enjoy

My stuff will ship as well tomorrow

Just need address Tom. They are yours for the kid.